Motor Specifica ons & Electrical Requirements
This BVP25D has a 1/4 HP, 3-speed, 115-volt, 60 Hz induc on motor with a grounding
conductor. Thermally protected, it will automa cally shut down if overheated. The motor
will restart automa cally once cooled, for as long as it is plugged into a power source.
In the event of a malfunc on or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This air mover is equipped with an 10 . 14 AWG electric power cord having an equipment
grounding conductor and a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance with all local codes and
ordinances. Do not modify the plug provided. If it will not fit the outlet, have the proper
outlet installed by a qualified electrician.
Power Cords
Ÿ
Use three-pronged adapters that are UL and CE approved and with Ground Fault
Circuit Interrupter (G.F.C.I.).
Ÿ
Do not use cords that show any kind of wear or damage.
Ÿ
Cords are not covered by warranty
WARNING!
The Total amperage of the BVP25D Air Mover plus all other
devices plugged into the receptacle must not exceed 12 amps.
Grounding Instruc ons
The BVP25D must be grounded. Should it malfunc on, grounding provides a path of least
resistance for electric current and reduces the risk of electric shock. This appliance is
equipped with a cord that has an equipment-grounding conductor and a grounding plug.
The plug must be inserted into a properly installed and grounded outlet, in accordance
with all local
WARNING!
Improper
connec on of the
equipment-
grounding
conductor can
result in the risk of
an electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided with the appliance. If plug
does not fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE:
In Canada, the use of a temporary adapter is not permi ed by the Canadian
Electrical Code
Use with 115V
3-Prong Grounded
Connection
DO NOT
Use with a 3-Prong to
2-Prong Adapter
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
(574) 294-1910 - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
(574) 294-1910 - www.hawkenterprises.com
5
4
Lubrica on
NO LUBRICATION IS NECESSARY. The motor is equipped with life me lubricated bearings.
Storage & Transporta on
1. Before storing your air mover, it should be cleaned.
2. Wrap the power cord around the carry handle on top of the unit to keep it untangled.
3. If you have more than one unit, store units by stacking. Do not stack more than 5 units
high.
4. Never operate unit while on its side or while stacked.
5. THE BVP50 SHOULD BE STORED INDOORS.
CAUTION:
Do not operate this air mover stacked on top of each other. Do not stack
more than 5 units high for storage.
Servicing
In order to receive service or replacement parts under warranty, you must:
1. Call (574) 294-1910 for an RMA (Return Merchandise Authoriza on Number)
2. Have your proof of purchase ready.
Upon inspec on, we will advise you of the repairs needed and the cost (if applicable).
Hawk will issue repair or replacement parts depending on warranty.
Cleaning
WARNING:
To reduce the risk of injury from the air mover accidentally
star ng, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
User Servicing Instruc ons
WARNING:
Be sure to disconnect power supply before a emp ng to
service or remove any components. Do not a empt to service your air
mover beyond what is described in the user manual. For all other servicing,
follow instruc ons in the Warranty sec on.
HAWK
HAWK
ENTERPRISES
ENTERPRISES
Hawk BVP25D User’s Manual
Hawk BVP25D User’s Manual
