HAWEKA RPV1300, Operating Instructions Manual

Page: 22 / 36

R
UNOUT
M
EASUREMENT
D
EVICE
RPV1300
RPV1300 Operating Instructions
22
Measurement recording
7.3 Assigning the laser sensors
After selecting the wheel for measuring click Next to
go to the next program page (Fig. 42).
The positions of the individual laser sensors
have to be assigned to the program.
•
The top right section of the screen (Fig. 43) shows
that a laser sensor is active.
•
Now find the actively flashing laser sensor on the
measuring device.
•
Confirm the actual position of the laser sensor by
selecting it in the flashing image.
•
The position of the first laser sensor was assigned.
(Fig. 44)
•
Repeat the process for all other laser sensors.
•
When all laser sensors have been assigned click
“ Next ” (
Fig. 45
).
(Fig. 44)
(Fig. 43)
(Fig. 42)
(Fig. 45)