HAWE Hydraulik HICON, Original Assembly Instructions

Page: 5 / 27

Burn hazard Crushing hazard
Electrical voltage Suspended loads
No access to persons with pacemakers
and defibrillators
Mandatory signs
Protective equipment
Safety boots
Wear appropriate safety boots to protect your feet against mechanical hazards
Work gloves
Wear suitable work gloves to protect your hands against chemical and mechanical
hazards.
Safety goggles
Wear safety goggles to protect your eyes against chemical and mechanical hazards.
Protective clothing
►
Wear tted clothing without protruding parts.
►
Follow the safety data sheet of the hydraulic uid.
1.3 Applicable documents
Standard Designation
2006/42/EC Directive 2006/42/EC of the European Parliament and of the Council of
17 May 2006 on machinery, and amending Directive 95/16/EC
2014/30/EU Directive 2014/30/EU of the European Parliament and of the Council
of 26 February 2014 on the harmonisation of the laws of the Member
States relating to electromagnetic compatibility
2011/65/EU, RoHS Directive 2011/65/EU of the European Parliament and of the Council
of 8 June 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment
Regulation (EC) No 1907/2006 Regulation (EC) No 1907/2006 of the European Parliament and of the
Council of 18 December 2006 concerning the Registration, Evaluation,
Authorisation and Restriction of Chemicals (REACH), establish-
ing a European Chemicals Agency, amending Directive 1999/45/EC
and repealing Council Regulation (EEC) No 793/93 and Commission
Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC
and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EEC and
2000/21/EC
ISO 4406 Hydraulic uid power. Fluids. Method for coding the level of contamina-
tion by solid particles
IEC 60529 Protection classes provided by housings (IP code) (IEC 60529:1989 +
A1:1999 + A2:2013)
DIN EN ISO 12100 Safety of machinery - General principles for design - Risk assessment
and risk reduction
EN 626-1:1994+A1:2008 Safety of machinery — Reduction of risks to health from hazardous
substances emitted by machinery — Part 1: Principles and specifica-
tions for machinery manufacturers
DIN EN 894-3 Safety of machinery - Ergonomics requirements for the design of
displays and control actuators - Part 3: Control actuators
HAWE Hydraulik SE B 8543 - 10-2021 - 1.0 5/27