English
16
OPERATION
DELAY FUNCTION
If you do not want the coffee maker to start operation immediately, you can use the
delay start function. For example: Now it is 8:00 and you want the coffee maker to
start automatically at 13:00. Follow step 1-5 of the previous section, then you can
set the delay start function as follows:
1. Set the current time that is 8:00 by pressing the buttons of “Hour” and “Min”.
Note:
The time cycle is 24 hours.
2. Press ”Prog” button once and the ”Prog” indicator flashes in green. The LCD
display shows “12:00” flickeringly. Set the automatic start time that is 13:00
by pressing the buttons of “Hour” and “Min”.
3. Press the ”Prog” button again and the ”Prog” indicator illuminates in green
solidly. After a while, the LCD display indicates the current time.
Note:
You may cancel the automatic start function by pressing the ”Prog”
button. If you want to change the automatic start time, follow step 2-3 again.
4. When the time is due, the ”On/off” indicator will illuminate in red and the
appliance starts brewing. The appliance will shut off automatically after finish
brewing.
Note:
During the brewing process, the buttons of “Prog” ,“Hour” and “Min” are
invalid.
CLEANING AND MAINTENANCE
Caution:
Unplug the appliance before cleaning. To protect against electrical shock,
do not immerse cord, plug or unit in water or liquid. After each use, always make
sure the plug is removed from the wall outlet.
1. Clean all detachable parts after each use in hot water.
2. Wipe the exterior with a soft, damp cloth to remove stains.
3. Water droplets may build up in the above area of the funnel and drip down to
the product base during brewing. To control the dripping, wipe off the area with
a clean, dry cloth after each use.
4. Use a damp cloth to gently wipe the warming plate.
Note:
Never use abrasive cleansers to clean any parts of the product.
