English
13
OPERATION
Assembly
1. Take all parts out of the box and remove all packing material.
2. Assemble the base (P20) and plastic feet (P21).
3. Screw the base tube (P11) to the base by using the screws (P12).
4. Unscrew the height adjustment nut (P9) and place the base cover (P10) on the
base (P11).
5. Return the nut (P9) in place.
6. Slide the base cover (P10) onto the cross base.
7. Slide out the extension pole (P8) from the base tube (P11) and mount the
motor unit (P6) on its top.
8. Place the motor unit firmly on the top of the extension pole, and tighten screw
(P7).
9. Un-screw the grill nut (P15) from motor cover (P4) and put the rear grill (P3) on
the motor cover (P4). Tighten the rear grill by the grill nut (P15).
10. Place the blade (P2) on the shaft (P13) and tighten by blade nut (P16).
11. Attach the vane (P19) to the front grill by the screws (P18).
12. Put the front grill (P1) on the rear grill (P3) and secure it with the clips (P17) and
screw (P22).
13. Adjust the required height and secure in place by tightening the height
adjustment nut (P9).
14. If needed, you can adjust the air flow angle by the joint (P23).
Note:
Make everything in reverse procedure to disassemble the unit.
Use
1. Connect the assembled fan to a wall outlet.
2. Start the fan by pressing on one of the buttons (P14). Press the 0 button to
turn off the fan.
Button (0) – Off
Button (1) – Low fan speed
Button (2) – Medium fan speed
Button (3) – High fan speed
Oscillation
1. To activate the oscillation (rotate from side to side), press the oscillation knob
(P5).
2. To stop oscillation, pull the oscillation knob P5 out.
Cleaning and maintenance
–
Wipe the fan regularly with a well wrung cloth, and always keep the grill free
of dirt. Never use corrosive or abrasive detergents, as these may damage the
plastic parts of the fan.
