4
9
1)
Hold computer with bottom angled toward Docking Station. Lower
computer into the bottom of the Docking Station.
2)
While keeping downward pressure on the computer, pivot it into Docking
Station so the handle snaps into Latch Mechanism.
Operation - Docking
EC DECLARATION OF CONFORMITY
in accordance with EN 50498
Manufacturers Name:
Havis, Inc.
Manufacturers Address:
47099 File Mile Road, Plymouth Twp, MI 48170 USA
Declares under our sole responsibility that the product:
Product name: Havis Docking Station For Getac RX10 Rugged Tablet
Model: DS-GTC-50X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.
Is in conformity with the following standards or other normative documents:
Automotive EMC Directive
EN 50498:2010, Electromagnetic compatibility (EMC) -
2004/108/EC:
Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU
Restriction of the use of certain hazardous substances (RoHS)
Supplementary Information:
The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8,
and 6.9. This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.
Plymouth twp, MI, USA
January 29, 2016
Bruce Jonik, Director of Engineering , Havis, Inc.
FCC 47CFR, Part 15 compliance:
This is an FCC Class B device. Any changes or modifications
to the model DS-GTC-50X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.
Specifications
Power Supply Input
19V DC-In
Dimensions
11.4” ( 28.9 cm) H x 10.1” ( 25.6 cm ) W x 3.9” ( 9.9 cm ) D
Weight
2.6 lbs ( 1.2 kg )
Operating Environment
-20° C to 55° C ( -4° F to 131°F )
Storage Environment
-40° C to 71° C ( -40° F to 160° F )
Alignment Sockets
Bottom of Getac RX10 Rugged Tablet
Alignment Posts
DS-GTC-500 Series Docking Station
DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE,
CHECK ALIGNMENT OF TABLET ON DOCKING STATION.
NOTE: Ensure a proper connection by aligning the tablet’s
Alignment Sockets with the Docking Station’s Alignment Posts
