www.havis.com • 1-800-524-9900
4
5
5. Place the Front piece of Protective Case on the Back piece. Ensure
a proper fit by looking for gaps along the seam between the two pieces.
6. Holding the two pieces together, carefully turn the Protective Case over.
Installation
(continued)
Installation
(continued)
3. Place the iPad into the Back piece of Protective Case, ensuring the
connector cable is routed as shown.
4. Place the five (5) Rubber Corners & Edge onto the Back piece of
Protective Case, ensuring each one aligned properly or they will
not fit securely in place. Insert Rubber Edge piece (#5 below) with
short edge along outside edge of Protective Case.
Some slight warping
will be evident if
inserted incorrectly
Align the
Headphone Port
location to ensure
proper orientation
of two pieces
