Havis C-VS-1900-INUT-PM, Installation Instructions

Page: 1 / 5

C-VS-1900-INUT-PM _INST_7-17
TOOLS REQUIRED:
Phillips Screw Driver
Standard Socket set T-20 Torx Bit
Metric Socket set Wire Cutters Wire Crimping tool
HARDWARE:
QTY
DESCRIPTION PART#
1 Front hump bracket CM008109
1 Rear mount bracket CM004239
1 Driver side trim panel CM008120
1 Passenger side trim panel CM008121
2 12 volt socket CM216560
1 Rear conduit cover CM007945
2 Hardware plug 7/8” CM86430
2 Speed nuts GSM30199
4 1/4" Flat washer GSM31005
2 1/4" x 3/4" Machine bolt GSM33001
6 #8-18 x 1/4" Screw GSM33178
2 6mm x 20mm machine bolt GSM33711
2 #10 x 3/4" Machine screw GSM34170
1 USB extension cable GSM70141
INSTALLATION INSTRUCTIONS C-VS-1900-INUT-PM
2013-2017 FORD INTERCEPTOR UTILITY
Fits Standard Interior and Optional Upgrade (Code 65U)
Vehicle specific console
19” inches of equipment mounting space and mount for
Brother Pocket Jet Printer
Always
!

Read all instructions before installing any Havis, Inc. products.

Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!

Use hardware provided with install kit