C-DMM-3011_INST_4-20
Place frame & hinge assembly onto support brackets
and make sure it fits around radio properly.
Plug radio back in and attach to support brackets
with 8-32 Keps nuts. (11/32” socket)
Position VESA plate on back of Device as desired.
Attach VESA plate with carriage bolts to the back
of the dock. The gray PVC washer will go between
this bracket and the DMM swivel plate
Attach frame with 1/4" x 1/2” pan head
bolts and star washers. Driver side shown.
Attach frame with 1/4" x 1/2” pan head bolts
and star washers. Passenger side shown.
Attach side support bracket to passenger side
mount bracket with 1/4"x 1/2" flat head bolts.
Note: Use a drop of Loctite on each bolt.
