C-DMM-3011_INST_4-20
TOOLS REQUIRED:
•Ratchet Wrench
• Socket Set • 7/16” Open End Wrench • T-20 Torx bit
• Phillips Screwdriver (short)
• Dash panel removal tool • Wire stripers/cutters
Notes:
1.
The C-DMM-3000 swivel plate accepts C-MM-301 offset bracket used with C-MM-2XX adaptors.
2.
C-MM-2XX series adaptor brackets are not needed for most VESA 75 and other Havis Docking
Station mounting applications.
3.
CM010471 VESA rotator plate gives additional positioning options, but is not required
depending on mounting preference.
4.
Does NOT work with 8.4”, 12” displays or other radios with the following Sales codes:
UAS, UAM, UAQ, UAV and UAX
ALWAYS!
Read all instructions before installing any Havis, Inc products.
Use hardware provided with install kit
INSTALLATION INSTRUCTIONS
C-DMM-
3011
Flip up Dash Monitor Mount
2013-2019 Ram 1500 Special Services Police & 1500 Tradesman Pickup Truck with "Classic" Body style
2013-2019 Ram 1500, 2500, 3500 Retail Pickup Truck with "Classic" Body style
**Compatible with 3-Inch and 5-Inch Radio Display ONLY (Sales codes RA1, UA1, RA2, UAA)**
HARDWARE and PARTS:
QTY DESCRIPTION
PART#
1
Driver side mount
CM009612
1
Passenger side mount
CM009613
2
Side support bracket
CM009614
1
VESA rotator plate
CM010471
2
1/4" x 3/4" Carriage bolts
GSM32000
1
PVC washer
CM010648
2
1/4" Plastic flat washer
CM86600
4
1/4" Steel flat washer
GSM31005
4
1/4" Nylock nut
GSM30016-1
4
1/4" Star washer
GSM31035
4
1/4"x 1/2" Phillips pan head bolt
GSM33123
4
1/4"x 1/2" Flat head bolt
GSM34057
2
1/4"x 3/4" Hex head bolt
GSM33001
4
8-32 Keps nut
GSM30027
1
Loctite (removable medium strength)
GSM20075
