C-DMM-3004_INST_4-20
INSTALLATION INSTRUCTIONS
C-DMM-3004 Flip up Dash
Monitor Mount
2014-2020 Dodge Durango
TOOLS REQUIRED:
Ratchet Wrench
Dash panel removal tool
Open End Wrench - 7/16”
Socket Set
Phillips screwdriver
Always
!
Read all instructions before installing any Havis, Inc. products.
Check for obstructions (Wires, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
HARDWARE and PARTS:
QTY DESCRIPTION
PART#
2
Upper support bracket
CM009333
2
Side support bracket
CM009334
4
10-32 x 1/2" Machine screw
GSM33118
4
#10 Flat washer
GSM31003
2
10-32 Keps nut
GSM30028
1
VESA rotator plate
CM010471
2
1/4" x 3/4" Carriage bolts
GSM32000
1
PVC washer (2.875” diameter)
CM010648
2
1/4" Plastic washer
CM86600
2
1/4" Steel washer
GSM31005
2
1/4" Nylock nut
GSM30016-1
Notes:
The C-DMM-3000 swivel plate accepts C-MM-301 offset bracket used with C-MM-2XX adaptors.
C-MM-2XX series adaptor brackets are not needed for most VESA 75 and other Havis Docking Station
mounting applications.
CM010471 VESA rotator plate gives additional positioning options, but is not required depending on
mounting preference.