C-TCB-17-INST-12-04
SUB ASSEMBLY:
1.
Confirm receipt of all hardware and components.
2.
Remove front inner and outer passenger seat bolts on vehicle.
INSTALLATION:
1. Mount C-TCB-17 into vehicle:
•
Position pole support assembly between seat base mount and floor of vehicle
•
Align holes in pole support assembly with holes in seat base.
•
Loosely attached factory seat bolts that were removed during subassembly.
•
Pre-drill floor of vehicle at the location of the hole on the pole support assembly
using a 3/16” drill bit.
•
Attach to vehicle using ¼” x 1” Hex head lag bolt.
Note: When drilling into floor of vehicle, be sure to check for obstructions prior to drilling or lag
bolting to floor.
•
Tighten down passenger side factory seat bolts.
•
Mount optional C-3090, computer-mounting platform, to telescoping pole assembly
using hardware and instructions provided with C-3090.