4
KK-K9-F14-K-PT_INST_11-08
2006-2008 FORD EXPEDITION DOOR
Leave passenger-side rear seat
Attach the rear floor mount bracket
to the K9 housing with ¼ x ½ bolts.
Slide K9 section of assembly
through back hatch of vehicle.
Be
careful not to rip headliner or
scratch trim panels.
Remove bolt
Cut on this line
1.
Remove the specified bolt and cut on
the line shown left.
2.
The upper portion of the cut piece
will remain off.
3.
Save for vehicle re-sale.
Back seat configuration for
Ford Expedition
Remove seat bolts from center
and driver side Back seats.
Remove rear plastic storage
compartment if included.
