Manual Mode
Press and release the Hand button to enable Manual mode. The red LED Hand light will turn
on. Use the up and down arrow keys to manually set a temperature of your choice. The
radiator will operate continually in this mode until the Hand button is pressed again. When
the Hand button is pressed, Manual mode is turned off and it will resume following your
chosen plan.
Frequently Asked Questions
–
Programming
How do I go back to a previous time slot if I want to change my program?
Pressing the PROG button will allow you to go backwards until you reach the desired time
slot. For example, if you
’re programming 17:00 and you want to go back to 15:00, press the
PROG button twice. Once you’ve chan
ged the heat mode for 15:00, press OK twice to return
to 17:00.
Can I copy a single day’s schedule across multiple days?
Each day will need to be programmed individually. This programmer has no copy function.
Why is my radiator showing a flashing green
light when I’ve selected an Economy
temperature?
The radiator’s Anti
-Freeze mode is set to 7 °C. If you also set your Economy temperature to
7 °C, the radiator will show a flashing green light rather than a steady green light. Economy
mode will show a steady green light again
when it’s set to
a higher temperature.
I don’t want to program the whole week. How do I exit the programming menu without
going through each individual day?
If you are programming a time slot, press OK or PROG until the day is displa
yed, e.g. ‘ddTh’
.
Then press PROG to exit the menu. If you are on one of the other sub-menus, e.g. Day or
Hour, press PROG to return to the main screen.
