EN
62
RCES_LCD
Step 1:
Access the user menu by pressing
the holding the
button. Parameter 1 is
displayed.
Step 2:
Successively press the
or
buttons until parameter 4 is selected. The display
alternately shows the ambient temperature in the room and the compensation value.
Step 3:
Press the
button to confirm.
Step 4:
By pressing the
or
buttons, enter the previously noted temperature value.
Once the temperature value has been entered, press the
buttons to confirm. The display
alternately shows the new temperature and the resulting compensation value (e.g., 22 to 24 ºC).
4
PARAMETER 4: TEMPERATURE SETTING
Parameter 1
Parameter 4
Ambient temperature
Parameter 4 allows you to adjust the ambient temperature measured by the radiator. This
calibration compensates for a possible difference between the temperature obtained in the
room by an external thermostat and the temperature programmed in the radiator.
Calibration should be done after 1 day of operation and if there is a large difference between the
room temperature and the ambient temperature measured by the radiator.
1. Place a precision thermometer in the room away from the radiator.
2. After one hour of heating, record the measured temperature on the thermometer.
The compensation range is + 5 ºC / - 5 ºC.
3. OPERATION
