• avoid usage of extension cords
because the extension cord may over-
heat and cause a risk of fire. never
use a single extension cord to operate
more than one oFr.
• If the supply cord is damaged, it must
be replaced by the havells authorized
service centre.
• Do not insert or allow fingers or for-
eign objects to enter any ventilation
or exhaust opening as it may cause
an electric shock or fire or damage to
the oFr. Do not block or tamper with
the oFr in any manner while it is in
operation.
• Do not block air intakes or exhaust
in any manner, to prevent fire. Do not
place oFr on soft surfaces, like on
sofa, bed, where openings may be
blocked.
• always place the oFr on a
stable and flat level surface when in
operation, to avoid the chance of
the oFr overturning.
• this oFr is hot when in use. to avoid
burns, do not touch hot surfaces with
bare skin. always use handle when
moving the oFr. Keep combustible
materials, such as furniture, pillows,
bedding, papers, clothes and curtains
at least 0.75 m away from the front of
the oFr (when put on the table) and
keep them at least 0.3 m away from
the sides.
• the oFr is not intended for use in wet
or damp locations. never locate the
oFr where it may fall into a bath tub
or other water containers.
• the appliance is for household indoor
use only. Do not use at outdoors or for
any commercial or industrial purpose.
note: In order to avoid overheating,
do not cover the oFr.
• the oFr must not be located
immediately below a socket-outlet.
caution: In order to avoid a hazard
due to inadvertent resetting of the
thermal cutout, this appliance must
not be supplied through an external
switching device, such as a timer, or
connected to a circuit that is regularly
switched on and off by the utility.
note: oFr with Fan. the
appliance is equipped with
additional function for con-
vection warm air. to activate
this function, simply press the fan
switch in front of the oil heater.
• Do not disassemble the oFr.
• to avoid danger of electric shock,
unplug the oFr from outlet when not
in use or before cleaning. If the power
cord is damaged, it must be replaced
and repaired by authorized service
centre.
caution: Do not operate without
wheels attached. Do operate the oFr
only in up right position (wheels on
the bottom, controls on the top), any
other position could create a hazard
ous situation.
4
3
2
1
• assemble the wing nuts from the
‘u’-shaped bolt provided, attach the
‘u’-shaped bolt to
• the ‘u’- facing flange between first
and second fins ( near the front cover).