2 of 3
ASSEMBLY
C
AREFULLY REMOVE THE CONTENTS FROM THE CARTON AND KEEP THE CARTON FOR FUTURE STORAGE
.
DO
NOT
FORCIBLY
REMOVE ANY CONTENTS
.
Step 1:
Locate the
T
REE
S
TAND
.
Rotate the legs until the three (3) holes on the inner
and outer walls of the hub align, and the stand forms an “X” shape (
see
Fig. 1
).
There are three (3) screws with the stand. Insert the screws into the holes, but do
not turn all the way in. Leave space inside the hub for the tree pole to slide down.
Place the stand where you are going to set up the tree.
THIS PRODUCT IS SUITABLE
FOR INDOOR USE ONLY.
IMPORTANT: DO NOT PLACE THE TREE WHERE IT IS
LIKELY TO WOBBLE DUE TO UNEVEN FLOORS OR THICK CARPETING. PLACE THE TREE
ON A LEVEL SURFACE.
Step 2:
Find
T
REE
S
ECTION
A
, tagged with the letter “A”. Remove the green pole cap (
see Fig. 2
) that is
covering the bottom of the pole. It is a protective cover only and can be kept for storage if desired.
Insert T
REE
S
ECTION
A into the T
REE
S
TAND
. Do not force the pole. It will slide down to its correct position.
Make sure the pole is firmly in the stand. Turn all three screws evenly until they touch the pole. If Tree
Section A is not sitting straight, then simply loosen the screws, adjust the tree pole, and retighten the
screws.
Remove any packing strap wrapped around the tree section. Allow the branches to fall into place.
The branches are connected to the tree pole by metal hinges (
see Fig. 3). NOTE
:
S
OME BRANCHES MAY
CATCH ON ONE ANOTHER
.
IF THAT OCCURS
,
SLOWLY PRESS DOWN ON EACH BRANCH UNTIL IT FALLS INTO PLACE
.
Step 3:
FInd
T
REE
S
ECTION
B
, tagged with the letter “B”. Remove the green pole cap from the
bottom of the pole. Insert T
REE
S
ECTION
B into T
REE
S
ECTION
A. Make sure the section is sitting
securely. Take off any packing strap wrapped around the tree section and allow the branches to
fall into place.
Step 4:
Locate
T
REE
S
ECTION
C
, tagged with the letter “C”. Insert T
REE
S
ECTION
C into T
REE
S
ECTION
B. Make sure the section
is sitting securely. The branches are not hinged to the pole in this section, so you will need to pull the branches down
slightly by hand.
NOTE
:
The top, inner part of the pole to T
REE
S
ECTION
B has a green pole adapter inside. This pole adapter is not to be
removed. T
REE
S
ECTION
C
has a green stem coming off the bottom of its pole which fits snuggly into this adapter and
gives stability to your treetop.
CAUTION: TWO PEOPLE MAY BE NEEDED TO BALANCE AND ASSEMBLE THE UPPER TREE SECTION. PLEASE USE A
LADDER, IF NEEDED, AND FOLLOW ALL LADDER SAFETY INSTRUCTIONS.
SHAPING
1.
The branches were condensed to fit into the box and can be reshaped to their original fullness by bending and
separating each of the branches in a more realistic manner.
2.
Please reference the image on the cover of this instruction manual to see what the tree should look like.
3.
Shape by section and layer, starting at the bottom of the tree and working your way up to ensure coverage of the
whole tree.
4.
On each branch, begin with the tips closest to the pole and work your way to the end of the branch.
5.
The tips should be shaped up and to the sides, resembling a peacock’s fanned tail. Offset the tip from the tip before
to hide the tree’s pole and fill spaces. Continue spreading the tips until they resemble that of a real tree.
6.
It is recommended to shape the top section before placing it on the tree to avoid shaping from a ladder.
7.
After shaping the whole tree, step back and take an overall look. Shift branches to fill any gaps. Your tree is now
ready to decorate and enjoy!
CLEANING
&
CARE
A
S YOU WILL BE USING THE TREE EVERY YEAR
,
FOLLOWING ARE TIPS TO KEEP IT IN GOOD CONDITION AND MAINTAINED
:
•
Dust gently using a soft cloth or fabric duster.
•
Do NOT use any chemicals or solvents to clean.
•
Follow all Storage and Safety Instructions.
Fig. 1
Fig. 3
Fig. 2
