3 of 4
4.
Consult the product photo of the tree during shaping. This tree has a downswept appearance. Offset the tips to hide
the tree’s pole
and fill spaces. Continue spreading the tips until they resemble that of a real tree.
5.
After shaping the whole tree, step back and take an overall look. Shift branches to fill any gaps. Your tree is now
ready to decorate and enjoy!
CLEANING
&
CARE
As you will be using the artificial Christmas tree every year, it is essential to keep it in good condition and clean.
•
Dust gently using a soft cloth or fabric duster.
•
Do NOT use any chemicals or solvents to clean.
•
Handle the light sets gently. Do NOT pull or tug light sets as this may inadvertently loosen the bulb.
•
Follow all Storage and Safety Instructions.
STORAGE
1.
Remove any ornaments and decorations that were added by you and did not come with the tree.
2.
Remove the batteries from the battery box.
3.
Starting with the top, separate the tree section, pole, and stand gently, being sure not to roughly handle as it
could cause damage to the parts.
4.
Compress the tree section by squeezing the branches together so that it will fit more easily into the storage box
or container. You can also tie a ribbon or cord around the section to secure the branches closer together for
storage.
5.
Place all the parts gently back into the storage box. The box will help prevent the tree from being damaged
should it get bumped in your garage, basement, or other storage location. Tape the box shut to keep out any
dust or insects. When packing up the tree, please ensure that there is no undue strain or stress on the light sets
to ensure they do not get cut, frayed, or damaged.
6.
Be sure to store the tree in a cool, dry area free of water and moisture to prevent mold and mildew from
accumulating and a musty odor developing. Exposing your tree to excessive heat or humidity may damage your
tree. DO NOT STORE TREE IN A DAMP AREA OR IN AN AREA WHERE THE TEMPERATURE EXCEEDS 100ºF. STORE
THE CARTON FLAT AND
NOT
UPRIGHT ON ITS SHORT END.
TROUBLESHOOTING
GUIDE
FOR
LIGHTS
1.
Push the I/O (On/Off) button on the Battery Box. Check to ensure rubber protection over button intended to keep
out water is not damaged.
2.
Check to ensure all batteries are fresh and in correct polarity (+ and -) positions.
NOTE: LED bulbs are permanent and cannot be removed from the light sets.
IMPORTANT
SAFETY
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS AND WARNING TAGS INCLUDED WITH THIS TREE.
SAVE FOR FUTURE USE. THIS TREE IS SAFE FOR INDOOR USE ONLY.
•
WARNING!
This is not a toy. For decorative use only. Keep out of reach of children.
•
Do not operate this product if the battery box or light set is damaged. Always inspect for signs of damage or
wear. If there are any observable defects, immediately dispose of them and replace it with one that is in
working order.
•
Do not immerse the tree or any of its components in water or other liquids.
•
This seasonal use product is not intended for permanent installation or use.
•
This product is not intended for commercial purposes.
•
Do not secure the wiring of this product with staples or nails or place on sharp hooks or nails.
•
Do not alter the construction of the wiring in anyway.
