EPC500ST-INS-LAB-RevA21 21
3.5.8 Memory and Preset Functions (Buttons 15-18)
17
18
16
15
Figure 3.5-4B
15 16 17 18
15
MEMORY Position chair to desired position. Enter MEMORY MODE by pressing and holding
MEMORY button (15) for three seconds until LED flashes. Once MEMORY LED
flashes, simultaneously press and hold MEMORY button (15) and desired PRESET
button (16, 17, or 18) until beeping stops (MEMORY LED will stop flashing and go
out and PRESET LED will illuminate). Once MEMORY button and PRESET button are
released, the position saves, LEDs go out, and MEMORY MODE exits. (After entering
MEMORY MODE, PRESET buttons that illuminate are already programmed, but can be
overwritten; PRESET buttons that don’t illuminate are not yet programmed.)
16
PRESET 1 Press and hold PRESET 1 button until saved pre-programmed position is achieved.
LED illuminates steady green while pressed, goes out when released.
17
PRESET 2 Press and hold PRESET 2 button until saved pre-programmed position is achieved.
LED illuminates steady green while pressed, goes out when released.
18
PRESET 3 Press and hold PRESET 3 button until saved pre-programmed position is achieved.
LED illuminates steady green while pressed, goes out when released.
