7
ENGLISH
ASSEMBLY
3. To position the auxiliary handle, move and rotate the auxiliary handle to a
position that is comfortable for you.
1. Extension cords.
Use only 3-wire extension cords that have 3-prong ground ing plugs and
3-pole receptacles that accept the machine's plug. When using the machine
at a considerable distance from the power source, use an extension cord
heavy enough to carry the current that the machine will draw. An undersized
extension cord will cause a drop in line voltage, resulting in a loss of power
and causing the motor to overload. Use the chart provided below
（
Fig. 8
）
to
determine the minimum wire size required in an extension cord. Only round
jacketed cords listed by Underwriter's Laboratories (UL) should be used.
2. Connect the upper tube and lower tube together, keep the square hole on the
same side. Insert the carriage bolt and tighten the knob.(Fig.5 & 6)
OPERATION
WARNING! Always use the correct voltage:
The voltage of the power source
must match with the values on the nameplate of the tool.
!
Before using the machine (Fig. 8 & 9)
Figure 5
Figure 6
Figure 7
