19
ENGLISH
Product Features
The numbering of the product features refers to the illustration of the machine
on the graphics page
1. Saw blade
2. Adjustable footplate
3. Blade holder control button
4. Rubber sleeve
5. Body
6. Handle position adjustment switch
7. Speed adjustment dial
8. Power cord
9. Switch locking button
10. On/Off trigger switch
11. Handle
12. Orbital action button
13. Footplate adjustment button
14. Blade holder (Fig.A, p.14)
15 Blade strut (Fig.A, p.14)
To start the tool, push the switch locking button (9) and then press the trigger
switch (10) and keep it pressed.
To switch off the tool, release the trigger switch (10)
Observe correct voltage! The voltage of the power source must comply
with the voltage specified on the name plate of the tool.
Note: For safety reasons, the trigger switch (10) cannot be locked in the on
position; it must remain pressed during the entire cutting operation.
Switching On and Off (Fig.A, p.2)
APPLICATION
TECHNICAL SPECIFICATONS
OPERATING INSTRUCTIONS
Model
PT100914
Voltage
Protection class
Amperage
No-load speed
Tool holder
Stroke length
120 V - 60 Hz
Class II /
10 amp
500-2700 SPM
TOOL-FREE
1-3/16'' (30 MM)
