9
Important!
Safety Instructions
All Operators Must Read These
Instructions Before Use
General Power Tool Safety Warnings
Warning
ead all safety warnings and all
instructions.
Failure to follow all warnings, and
instructions may result in electric shock, fre or serious injury.
Save all warnings and instructions for
future reference
For household use only.
Warning!
- To reduce the risk of electric shock - Do not use
on wet condition, dry location use only. Do not expose to rain.
Warning!
- Do not allow to be used as a toy. Close
attention
is necessary when used by or near children.
Use only as described in this manual. Use only
manufacturer's recommended attachments.
Do not put any object into openings. Do not use with
any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air fow.
Keep hair, loose clothing, fngers, and all parts of body
away from openings and moving parts.
A spark in the
vicinity of the battery during charging.
To use this tool properly, you must observe all safety warnings,
assembly, operating and maintenance instructions in this
manual. Always follow regulations regarding use in the area
the tool is being used. Do not allow children, or a person
physically incapable of operating the tool. Children should
be supervised at all times if they are in the area in which the
tool is being used. It is also imperative that you observe the
accident prevention regulations in force in your area. The same
applies for general rules of occupational health and safety.
Even when the tool is used as prescribed it is not possible to
eliminate all residual risk factors. The following hazards may
arise in connection with the tool's construction and design:
• Damage from fying debris.
• Damage to eyes if effective safety glasses or shield are
not worn.
• Damage to ears if effective ear defenders are not worn.
• Injury or illness caused by inhalation of dust and debris if
breathing protection is not suffcient.
Warning
When using power tools, basic safety precautions should
always be taken to reduce the risk of fre, electric shock, and
personal injury. Always follow the safety instructions in this
manual.
1.
Store tools safely. When not in use, tools should be
stored in a dry place inaccessible to children.
2.
Do not force the tool. The tool will do the job better and
safer working at the rate for which it was designed.
3.
Use the correct tool for the job. Do not force small
tools or attachments to do the job best handled by a
heavier duty tool. Never use a tool for a purpose other
than that for which it was intended.
4.
Dress correctly. Do not wear loose clothing or jewelry.
They can be caught in moving parts. Rubber gloves
and non-slip footwear are recommended when working
outdoors. If you have long hair, wear a protective hair
covering.
5.
Use safety accessories. Safety glasses and ear muffs
should always be worn.
6.
Do not overreach. Keep your footing secure and
balanced at all times.
7.
Look after your tools. Keep tools clean for better and
© 2012 by HAUSSMANN, LLC
All rights reserved. Original instructions.
Save these instructions
R
•
•
•
•
safer performance. Follow the instructions regarding
lubrication and accessory changes. Keep tool handles
!
!
dry, clean and free from oil and grease.
Stay alert. Watch what you are doing. Use common
sense. Do not operate a power tool when you are tired
or distracted.
Before using a tool, check that there are no damaged
parts. If a part is slightly damaged, carefully determine
it will operate properly and perform its intended
function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, proper mounting
and any other conditions that may affect the operation
of the tool. A guard or other part that is damaged
should be properly repaired or replaced by an
authorized service facility, unless otherwise indicated in
this manual.
Defective switches must be replaced by an authorised
service facility. Do not use a tool if the switch does not
turn the tool ON and OFF correctly.
Guard against electric shock. Prevent contact with
grounded objects such as water pipes.
8.
9.
10.
11.
12.
Use only approved parts. When servicing, use only
identical replacement parts. Use an authorised service
facility to ft replacement parts.
