Page 5
Page 6
Page 7
Page 8
You should see an icon close to the Windows clock. You will reach the
menus of the 7 day EPG by a right click on this icon. For more informa-
tion on its operation, visit
www.hauppauge.co.uk/epg
.
WinTV-Scheduler allows you to schedule the recording of TV shows.
WinTV-Scheduler, once it is set, can be closed, and the WinTV applica-
tion will “wake up” at the desired time and tuned to the desired channel.
After installation, WinTV-Scheduler can be found by going to
Start /
Program files / Hauppauge WinTV
.
WinTV-Scheduler & Dual records
WinTV-Scheduler works by using the Windows Task Scheduler to
launch WinTV at the chosen time. WinTV-Scheduler sets up a com-
mand line in Task Scheduler to run WinTV2000, specifying a TV chan-
nel and a length of time to record.
The background recorder (BG recorder) allows you to record your pro-
gram with out the WinTV2000 application present on your desktop.
To set up an event for timed watching or recording, run WinTV2000
Scheduler and click on the Add Program.
N
ote: You cannot access the Wing settings until you have pur-
chased the optional transcoder software, for more informa-
tions see http://www.hauppauge.com/wing. Please refer to
the WingSE guide for information on using the Wing settings.
The items that need to be set for each event are:
●
Time to Begin Program:
set to the desired start time. The default
time is about 3 minutes from the current time. Click on the hour to
set the hour, the minute to set the minute and the second (if you feel
this is necessary) to set the minute to start the program.
N
ote: It takes about 10 seconds to launch the WinTV and set
up for recording, so set the Time to Begin Progam to 1 minute
before the time your TV show actually starts.
●
Time to End Program:
set to the time to end this event.
Note:
you
need to leave at least 30 seconds between scheduled programs to
give the recorder time to set up its disk buffers.
●
Program Period:
one time, daily, weekly
The WinTV2000’s remote control software is installed automatically
during the installation of the WinTV applications.
You will see the WinTV Remote icon in the Device Tray.
The installation will add a shortcut to
IR.EXE
to the Startup group, so
that IR.EXE is loaded every time after Windows has restarted.
If you need to re-start the IR application you can do so by clicking on
Start / All programs / Hauppauge WinTV / Restart IR
.
N
ote: If you have Windows XP Media Center Edition, you
should use the MCE remote control that was shipped with
your MCE PC. If you don’t have an MCE remote control, you
can use the Hauppauge remote control but this is not Media
Center certified, so some functions will not be available like the
green start button. It will however allow you to navigate in the
Media Center application.
Checking the function of the IR Remote
To check the remote control opera-
tion, point the Remote transmitter
at the Remote control receiver.
When you click the
Go
button on
the Remote transmitter, after 3-4
seconds the Remote icon should
flash, indicating that the Remote
application is running. After the
remote icon flashes, the WinTV
appplication selector will appear in
a window on your screen.
Remote control when
watching live TV
0-9 buttons
: channel numbers
Record button
: opens the SoftPVR
tray.
Remote control when play-
ing video recordings
Skip ahead button
: skips ahead in
the video 30 seconds per click.
Holding the skip ahead button will
autorepeat, and advances the video
about 5 minutes per 10 seconds the button is depressed.
Skip back button
: skips back 30 seconds per click. Pressing and hold-
ing the skip back button makes the video go back about 5 minutes for
10 seconds the button is depressed.
Go button
: brings up the WinTV task list. Allows you to start
WinTV2000, WinTV32.
Menu button
: brings up the Windows task list. Use the left and right
arrows to change to other Windows tasks.
Green power button
: will turn off the WinTV application
0 - 9 buttons: When playing back a recording, the “1” button will skip
to 10%, the “2” button 20% etc of the length of the recording.
Installation of the Remote Control software
To remove the driver and application
Insert the installation CD, click
Start / My Computer
, double click your
CD-ROM drive
, double-click on a file called '
hcwclear.exe
' put a tick in
'
Search for
'.
If you now re-start the computer and wait until windows has fully
booted. The add new hardware wizard will appear and you can contin-
ue to install the software as per the start of this guide.
Problem: No TV station are found. Please ensure that you are locat-
ed in a area that has Digital Terrestrial TV coverage.
Please visit
www.dtg.org.uk/retailer/coverage.html
If your area does have digital Terrestrial TV coverage, please check
yout TV antenna as most antenna’s that are over 10 years old may not
support the Digital TV broadcasts and you need to update yours to a
Wideband or Highgain.
Troubleshooting
●
Date to Begin Program:
todays date is the default. Change this if you
want to schedule on another date.
●
Source selection:
leave set at WinTV2000 to bring up the WinTV at
the requested time and on the requested channel.
●
Channel selection:
choose one of your scanned channels.
●
Recording options:
click on Record to File to record your show.
Leave this button unchecked to watch TV at the requested time. You
can also name your file to record.
Once these are set, click “
It’s Program
”. You can add more Events, up
to two recordings at once. it's currently the only way to record two
channels at the same time.
When you are finished click “
Close
”. The WinTV program does not have
to be running for the scheduler to work. If WinTV is not running, it takes
about 10 seconds to start WinTV2000 and to start the recording of TV.
Optional command lines when starting WinTV32/WinTV2000
Application
It is possible to start the WinTV application with different parameters
for example, to start the WinTV on channel 21 click
Start / run
and
type in :
C:\Program Files\WinTV\WinTV2k.EXE -c21
Always ensure that the command is listed after the hyphen:
NoSplashScreen = -nss
WinTV32Mode
= -nc
WinTV2000Mode = -cg
NoTipOfDay
= -ntod
Suite
= -sSuiteName
Channel
= -cChannelNumber
WindowMode
= -mMode (for Mode set "tv", "NoTitle", "Title",
or "Off" ("Off" closes the current WinTV application)
For example:
C:\Program Files\WinTV\WinTV2k.EXE -mtv -nss
= Start WinTV2000
windows mode, with no splash screen
WinTV Command Line Commands
Radio Interference Statement:
The WinTV boards have been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy and cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equip-
ment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:
●
reorient or relocate the receiving antenna.
●
increase the separation between the equipment and receiver.
●
connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
●
consult the dealer or an experienced radio/TV technician for help.
FCC ID
: H90WINTV
CAUTION
: Changes or modifications not expressly approved by the
party responsible for compliance to the FCC Rules could void the
user's authority to operate the equipment.
CE Statement
: This equipment has been tested and complies with EN
55013, EN 55020 and IEC 801-3 part 3 standards.
FCC Statement
The device may not be disposed of with household rubbish. This
appliance is labeled in accordance with European Directive
2002/96/EG concerning used electrical and electronic appliances
(Waste Electrical and Electronic Equipment - WEEE). The guideline
determines the framework for the return and recycling of used appli-
ances as applicable throughout the EU. To return your used device,
please use the return and collection systems available to you.
Waste Electrical and Electronic Equipment
(WEEE)
7 day EPG
While in Pause mode, the A/V stream is always saved in the Replay
Buffer. To stop saving the A/V stream in the Replay Buffer, you must
exit the Pause mode by clicking
TV mode
.
Replay
While in the Pause mode, hitting the
Replay
button acts like the
Instant Replay you see on TV broadcast sporting events: the
audio/video goes back in time and you repeat what you have previous-
ly seen. Each click of the Replay button causes audio/video to go back
10 seconds. For example, if you want to repeat the audio/video you
saw 10 seconds ago, you would click the Replay button once. If you
want to see the video you saw one minute ago, you would need to
click the Replay button six times.
For extended replay times, you might find it more convenient to grab
the Video Position indicator control bar and move it to the left. Once
you let the control bar go, audio/video starts to play (it might take a
few seconds for the WinTV application to start playing).
You might have to move the Video Position indicator to the left and
right to find the desired spot to start replaying audio/video.
While Replaying, your audio/video program continues to be recorded
in the Replay Buffer. Therefore, if you have clicked the Replay button 3
times (so that you are replaying the audio/video seen 30 seconds ago),
the video you see in the WinTV window will be 30 seconds behind the
live program.
Skip Ahead
Clicking the
Skip
button will skip the video ahead 10 seconds.
Rewind
Clicking the Rewind button while playing video will rewind the
recorded video. Clicking the Rewind button again will continue the
playing.
Slow Motion
Clicking the Slow Motion button while playing video will play in
Slow Motion. Clicking the Slow Motion button again, will continue
playing normally.
Fast Forward
Clicking the Fast Forward button one time will fast forward your
video at 2X speed. Clicking the Fast Forward button two times will fast
forward your video at 8X speed.
Clicking the
Record
button will automatically generate a file name and
start recording your audio/video program.
Functions:
●
When recording TV, the record button will depressed
●
A time counter will be shown indicating the lenght of time of the
recording
If you click
Stop
the time counter will revert back to 00:00:00
The time is specified in a
Hour:Minute:Second
format.
Stop
Clicking the
Stop button will
stop the video you are recording
or playing back.
Play
Clicking the
Play
button will playback from disk the last video file
created. When playing a video, you can rewind, fast forward, replay 10
sec or skip forward 10 sec using the buttons on the control bar.
Pause
Clicking the
Pause
button while Playing will pause your audio/video.
Rewind
Clicking the
Rewind
button will play the video file in reverse.
Clicking the Rewind button again will continue the playing of the video.
Fast Forward
Clicking the
Fast Foward
button one time will fast foward your
video at 2X speed. Clicking the Fast Foward button two times will fast
foward your video at 8X speed. Clicking the button again will continue
playing back at normal speed.
Rewind
Record
Pause
Play
Stop
Display Counter
Forward
File
Video-Position
Play forward slow
Record mode
Slow Motion
Clicking the
Slow Motion
button during playback will cause the
video to play in slow motion (at 1/2 speed). Clicking the Slow Motion
button again will return the video to normal playback speed.
File button
Clicking the File button opens the File menu. The last file recorded
is listed in the File name box. In the File menu you can:
●
Rename your recorded video file:
To rename a video file, find the file
you would like to rename, highlight it with your mouse, and click and
hold the right mouse button. Go down to Rename and then you can
type in a new name. Remember: you must keep the MPG extension
on the file.
●
Play a video file previously recorded:
Find the file you would like to
play, highlight it with your mouse (one click of the mouse button)
and click Open. Then click the Play button.
●
Delete recorded video files which you no longer want:
Click your
right mouse button on the video file once, go down the menu and
click Delete.