5
15. If operating a power tool in a damp location is unavoidable, use a residual current
device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
16. Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
17. Remove any adjusting key or wrench before turning the power tool.
18. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
19.
Maintain power tools.
Check for misalignment or binding of moving parts, breakage of parts and any other
condition that may affect the power tools operation. If damaged, have the power tool
repaired before use.
20. Use the power tool, accessories and tool etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
How to Use This Product?
TM-71 sprays an even modern factory-like finish on any surface. Perfect for refinishing,
repainting, restyling, renewing, revamping and refreshing second-hand furniture,
cabinets, celling, fence, window, toy or boat, motorcycle, bicycle or wall.
This sprayer is with dual nozzles, which can spray thicker latex paint or oil-based paint.
TM-71 is easy to set up, easy to use and easy to clean up. This HVLP (high volume, low
pressure) sprayer will direct the finish on your project and has less over spray than
airless sprayer models.
Notes:
Practice before painting. Practice spraying water on cardboard, and adjust the paint
flow and turn the wings of the tip to get the desired spray pattern. (see Page 8 & 9.)
Keep spray tip, needle tip and check valve clean.
Check spray tip, needle tip and check valve for dried paint before each use.
Make sure paint tube is inserted tightly into the intake port.
Always clean check valve after each use. (see Check Valve. Page 10.)
Always clean the sprayer after each use. (see Clean Up, page 11.)
