![Haunted Hill Farm FRASER HILL FARM HHWTR-1FLSA Assembly Instructions Download Page 3](http://html1.mh-extra.com/html/haunted-hill-farm/fraser-hill-farm-hhwtr-1flsa/fraser-hill-farm-hhwtr-1flsa_assembly-instructions_2107934003.webp)
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
1. This product is for indoor or covered outdoor use only. Do not place in direct sunlight.
2. This product is for decoration only and is not a toy. Please use caution with children under the age of 8.
3. Do not position the decoration near candles, sources of heat, or in direct sunlight.
4. The decoration cannot be connected to the power supply directly.
5. Decoration should be on a level, stable surface to prevent it from falling over
6. This product is fragile and should be assembled with care.
7.
Please follow the steps and requirements specified in the instruction to ensure safety and reliability
during the installation.
Storage tips
: We suggest saving the carton for storing your figurine. Store in a cool, dry area where the
temperature does not exceed 100ºF.
www.HauntedHillFarm.com
TROUBLESHOOTING AND FAQ
Q: My animatronic is not turning on:
A: Check the battery pack connection. Ensure all batteries are attached and battery pack cover is secure.
Check to make sure the power switch is turned on.
Q: My figure is not lighting up
A: If your figure has a light component, check the wires on the inside of the body to make sure all plugs are
properly secured. Once secured, please check the battery back and on/off switch to make sure both are on/
attached.
Q: Where is the Battery pack on my figure?
A: Please check the back of the figure underneath the clothing. The Battery pack may be covered with a small
fabric covering.