8
Driver Installation
When you initially plug the MP3-WS into your computer, Windows will attempt to load an appropriate driver.
If an MP3-WS or other HauntBots controller has not previously been installed, you will need to manually
load the driver.
The exact screens will vary a bit
between different versions of
Windows. The MP3-WS will be
recognized by Windows as
CCS
USB to UART
rather than
HauntBots MP3-WS
. These
instructions cover an install on
Windows 7.
After the computer reports
that the driver was not
successfully installed, go
to device manager to
install it manually.
Click the Windows Start Button, right click on
Computer
then
scroll down and click
Properties.
Click
Device Manager
in the top left column.
