SKU 94768/69/70/71
For technical questions, please call 1-800-444-3353.
Page 2
67650
SPECIFICATIONS
Model 94768
1-7/8” Ball Coupler, 9” (L) x 2-1/8” (H) x
3-1/4” (W); Fits 2” channel;
spring loaded collar, 2000 Lb.
GVWR*, weight: 2.9 Lbs.; Meets V5 and
SAE J684 standards Class I.
Model 94769
1-7/8” Ball Coupler, 9” (L) x 2-1/8” (H) x
3-3/8” (W); Fits 3” channel;
spring loaded collar, 2000 Lb.
GVWR*, weight: 2.8 Lbs.; Meets V5 and
SAE J684 standards Class I.
Model 94770
1-7/8” Ball Coupler, 9” (L) x 2-1/8” (H) x
3-3/8” (W); Fits 2-1/2” channel;
spring loaded collar, 2000 Lb.
GVWR*, weight: 2.8 Lbs.; Meets V5 and
SAE J684 standards Class I
Model 94771
2” Ball Coupler, 10-7/8” (L) x 2-1/4” (H) x
4-1/2” (W); Fits 2-1/2” channel;
spring loaded collar, 3,500 Lb.
GVWR*, weight: 4.4 Lbs.; Meets V5 and
SAE J684 standards Class II.
Model 67650
2” Ball Coupler, 11” (L) x 2-1/4” (H) x 3” (W)
Fits 3” channel; spring loaded collar,
3,500 Lb. GVWR*, weight: 4.3 Lbs.;
Meets V5 and SAE J684 standards Class II
* Gross Vehicle Weight Rating
UNPACkING
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
SAVE ThIS MANUAL
You will need the manual for the safety warnings and
precautions, assembly instructions, operating and
maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND
PRECAUTIONS
WARNING!
: When using tool, basic safety
precautions should always be followed to reduce
the risk of personal injury and damage to equip-
ment.
Read all instructions before using this tool!
keep work area clean.
1.
Cluttered areas
invite injuries.
keep children away.
2.
Children must never
to allowed in the work area. Do not let them
handle machines, tools or extension cords.
Store idle equipment.
3.
When not in use,
tools must be stored in a dry location to in-
hibit rust. Always lock up tools and keep out
of reach of children.
Use the right Ball Coupler for the job
4.
. Do
not attempt to force a small Ball Coupler to
do the work of a larger industrial coupler.
There are certain
applications for which this
product was designed. It will do the job better
and more safely at the rate for which it was
intended. Do not modify a Ball Coupler and
do not use one for a purpose for which it was
not intended.
Dress properly
5.
. Do not wear loose clothing
or jewelry as they can be caught in moving
parts.
Do not overreach
6.
. Keep proper footing and
balance at all times. Do not reach over or
across running machines.
Maintain tools with care
7.
. Keep tools sharp
and clean for better and safer performance.
Follow instructions for lubricating and chang-
ing accessories.
Stay alert
8.
. Watch what you are doing, use
common sense. Do not operate any tool
when you are tired.
Check for damaged parts
9.
. Before using
any tool, any part that appears damaged
should be carefully checked to determine
that it will operate properly and perform its
intended function. Check for alignment and
binding of moving parts; any broken parts or
mounting fixtures; and any other condition
that may affect proper operation. Any part
that is damaged should be properly repaired
or replaced by a qualified technician.
Replacement parts and accessories
10.
.
When servicing, use only identical replace-
ment parts. Use of any other parts will void
the warranty. Only use accessories intended
for use with this tool. Approved accessories
are available from Harbor Freight Tools.
Do not operate tool if under the influence
11.
of alcohol or drugs
. Read warning labels if
taking prescription medicine to determine if
your judgment or reflexes are impaired while
taking drugs. If there is any doubt, do not
operate the tool.