background image

Page 2

For technical questions, please call 1-800-444-3353.

Lever Chain Hoist

Specifications

Rated 

Capacity

67144:  1/4 Ton (500 lb.)

96482:  3/4 Ton (1,500 lb.)

66106:  1-1/2 Tons (3,000 lb.)

Lift Height

5 Feet

Save This Manual

Keep this manual for the safety warnings and 

precautions, assembly, operating, inspection, 

maintenance and cleaning procedures.  

Write the product’s serial number in the back 

of the manual near the assembly diagram 

(or month and year of purchase if product has 

no number).  Keep this manual and the receipt 

in a safe and dry place for future reference.

IMPORTANT SAFETY 

INFORMATION

In this manual, on the labeling, and all other 

information provided with this product:

  This is the safety alert symbol.  

It is used to alert you to potential 

personal injury hazards.  

Obey all safety messages that 

follow this symbol to avoid 

possible injury or death.

DANGER indicates a hazardous 

situation which, if not avoided, 

will result in death or serious injury.

WARNING indicates a hazardous 

situation which, if not avoided, 

could result in death or serious injury.

CAUTION, used with the safety alert symbol, 

indicates a hazardous situation 

which, if not avoided, could result 

in minor or moderate injury.

NOTICE is used to address practices 

not related to personal injury.

CAUTION, without the safety alert symbol, 

is used to address practices not 

related to personal injury.

General Safety Rules

  WARNING Read all safety warnings 

and instructions. 

Failure to follow 

the warnings and instructions 

may result in serious injury.   

Save all warnings and instructions 

for future reference. 

The warnings, precautions, and 

instructions discussed in this 

instruction manual cannot cover all 

possible conditions and situations 

that may occur.  It must be understood 

by the operator that common sense 

and caution are factors which cannot 

be built into this product, but must 

be supplied by the operator.

1. 

Work area safety

a. 

Keep work area clean and well lit.  

Cluttered or dark areas invite accidents.

b. 

Keep children and bystanders away 

while operating tools.  

Distractions 

can cause you to lose control.

c.  Connect the Hoist to solid beam, 

capable of supporting the weight of the 

Hoist and equipment being lifted.

Summary of Contents for 66106













Reviews: