Page 5
Item 62253
For technical questions, please call 1-888-866-5797.
Trailer Box
Rubber
Grommets
7. Insert a 1/4″ carriage bolt through a
1/4″ flat washer and pass it through
the grommet and into the drilled hole in
the trailer tongue. Attach a flat washer
and attach a 1/4″ locking nut (do not
tighten at this time). Continue with the
other three locations. Secure all four
nuts tightly. See illustration below.
8. Make sure that there are no hidden
electrical wires of conduits below
the marked spots and drill a 1/4″
hole at each location on the chassis.
Clean all metal shavings.
9. Reposition the Box over the tongue
aligning the drilled holes.
10. Insert a 1/4″ carriage bolt through a
1/4″ flat washer and pass it through
the grommet and into the drilled
hole in the trailer tongue. Attach
a flat washer and attach a 1/4″
locking nut (do not tighten at this
time). Continue with the other three
locations. Secure all four nuts tightly.
