Haug Static Control Digital, Operating Instruction

Page: 8 / 20

4 General safety instructions
8
4 General safety instructions
All activities must be performed only by persons
authorized by the owner. Such persons must
have read and understood the operating
instructions.
Unauthorized conversions and modifications of
the SCD are not permissible for safety reasons.
Carry out a visual inspection each time before
you use the SCD.
Do not use the SCD in the event of visible
damage and suspected electrical defects.
Contact HAUG GmbH & Co. KG. in this case
(see cover sheet).
The SCD housing is not protected against
moisture.
Moisture and wetness may therefore
enter the SCD. This may result in defects within
the SCD or even failure.

Protect the SCD from humidity and wetness.
In the event of large temperature
differentials, condensation water will form on
the colder object.
Condensation water which
has formed within the SCD may result in
measuring errors or failure of the SCD.

Do not use the SCD immediately after you
have brought it from a cold into a warm
environment.

Allow the SCD to dry if condensation water
has formed.