3 Safety
7
3
Safety
Only the persons authorized by the operator may carry out tasks on
the ionizing unit.
The installer must be a trained and qualified electrician and must
have basic knowhow in the field of mechanical engineering. He must
read the operating instructions in full.
The operator or maintenance personnel must read the operating
instructions in full.
When working on the ionizing unit, switch off the voltage supply and
secure against inadvertent switching on.
Danger when touching during operation
The ionisation pins are under high voltage during operation.
Touching them can cause painful electric shock and burns. This can
trigger shock reactions and lead to secondary accidents.
• Never touch the ionisation pins during operation.
Dangers due to manipulated or faulty ionisation unit
Unauthorised conversions, moisture entering the ionisation unit or
damage to the ionisation unit bear the inherent risk of electric shock
or fire due to spark formation.
• If there is visible damage or suspected electrical faults,
immediately take the ionisation unit out of service and secure it
to prevent unintentional restart.
• The ionisation unit must be protected from moisture. Only use
water to clean the ionisation unit thoroughly, then let it dry.
• Never twist or bend the ionisation unit.
• Never attempt to repair the ionisation unit without prior
authorisation.
