Hauff-Technik HRK100, Assembly Instruction Manual, Page: 22 / 80

22
Art. Nr.: 5090032101 Rev.: 00/2018-06-05
11 The following instructions are to be observed prior to installation of the
cable/pipe seal HRK:
WARNING!
Risk of injury in the event of improper installation!
Improper installation can result in signifi cant bodily harm and property damage.
• The standard seal HRK installation must comply with the relevant professional
association regulations, VDE provisions, national safety and accident prevention
regulations as well as company regulations (work and procedural instructions).
• The nationally applicable laying and fi lling regulations for pipes and cables are
to be observed at all times.
• Prior to installing the standard press seal, any existing breaks or blowholes in the
cored hole have to be repaired.
• No cleaning agents containing solvent may be used to clean the cable seal. We
recommend using cable cleaner KR M.T.X.
• For details of other accessories and further information, see www.hauff-technik.
de and the technical specifi cation sheets..
NOTE!
No sealing due to incorrect assembly!
Improper installation can result in damage .
• For the one-sided installation of the cable seal into core drillings, carry out the
sealing on the outside of the building.
• Any anticipated reductions must be compensated for by the installation of
centring guides and/or spacers in the conduits or core drillings.
• Seal the underground and pipe substructure well prior to laying pipes/cables
so that the latter cannot subside.
Standard press seal HRK
EN