Glass fibre building entry
EN
GFH30
Art. Nr.: 5090033079 Rev.: 02/2022-03-08
17
7
Fasten the basic element of the wall terminator to the
wall by driving a screw into the wa
ll plug using a
screwdriver (see fig.: 22).
8
Check the position of the wall terminator and correct
if necessary (see fig.: 23).
9
Tighten the screw.
10
Insert the media line(s) into the wall terminator ele-
ment and push into the clip (see fig.: 24).
If inserted glass fiber micropipes or SpeedNet
pipes are to be blown in, they must be removed
from the wall terminator element. The blowing in
process must be done with straight glass fibre
pipes or SpeedNet pipes.
The minimum bending radiuses of the media
lines must be observed!
11
Attach the cover of the wall terminator element and
snap into place (see fig.: 25).
The GFH30 is fully installed.
Service tel 49 7322 1333-0
Subject to change!