hattrick TRAINER, User Manual

Page: 22 / 22

21
CODE DESCRIPTION REASONS & SOLUTIONS
E1
Communication abnormal:
The control and computer
has abnormal
communication after start
The computer shows fault code E1
Possible reasons
：
Communication obstructed between
controller and computer, please check the wire and make sure
the wire connect well and the wire without and danger.
E2
No Speed Wireless Sensor
Network
The computer shows fault code E2
Possible Reasons
：
Can’t receive the motor speed sensor
feedback above 3 seconds, please check sensor plug and
motor connect wire and the controller.
E3 Over-Current Protection
The computer shows fault code E3
Possible Reasons:Over the rated load cause too much
electricity that make system Self-preservation or some parts
blocked and make DC motor can’t process. Adjust the machine
and restart. Another please check the DC motor or controller
have any burned smell or not. If yes, please change the motor
or controller. Another make sure the power and voltage is
comply with standard.
E4 Incline self-learning fault
The computer shows fault code E4
Check incline motor sense wire and AC wire are inserted well;
AC wire is right inserted according to the indentify in the
incline motor; make sure the incline motor wire without
damager; after check those, press the button on controller,
then start self-learning again.
E6 Explosion-Proof Protection
The machine shows fault code E6
Possible Reason: Check the motor wire if connect well, and
then connect it again.
ERROR CODE AND SIGNIFICANCE