a. Press up/down arrow (
▲▼
) batton to advance / reverse to adjust to your weight .
When press (
▲▼
) shortly it will incease /decrease 0.1kg/0. 1lb .When press
(
▲▼
) button Continuously it will increase /decrease 1.0kg/2.2lb .
Press(on/set )button to confirm setting.LCD will prompt to next parameter setting
(memory station) at the same time.
b. Press Up / Down Arrow (
▲▼
) button to advance / reverse to the memory station
which you would like to choose or had been designated to you. Press (on/set) button
to confirm setting, LCD will prompt to next parameter setting(Gender) at the same
time.
c. Press Up / Down Arrow (
▲▼
) button to advance / reverse to choose the gender of
you. Press (on/set) button to confirm setting. LCD will prompt to next parameter
Setting (Height) at the same time.
d. Press Up / Down Arrow (
▲▼
) button to advance / reverse to the adjust to your
height . Press (on/set) button to confirm setting, LCD will prompt to next parameter
(Age) at the same time.
e. Press Up / Down Arrow (
▲▼
) button to advance/reverse to adjust to your age.
Press(on/set) button to confirm setting. LCD will prompt to Memory setting.
All setting complete!!!
At any stage of setting. Press on/start to enter normal operating mode.
At this point, you can continue to press (on/set) button a few consecutive times
to re-cycle through the setting mode to review and Ensure all the parameters
are correctly set . LCD will prompt to Memory setting. All setting comple
f. Press (start) button to exit setting mode and enter normal operating mode. LCD will
prompt to 'BF --- ' . you are ready to hold the BIA conductive pads of the device , and
let the unit compute your Fat %, Hydration %.
2. Hold the device in front of your breast ,and place your arms perpendicular to your
body (alway Ensure to only use your dry and clean hand to hold the device directly ),
while holding on , align your hand to the BIA conductive pads , one for each hands .
3. As soon as yo hold the pads , LCD will immediately display '□□□ ' .
4. Within a few seconds, the unit will automatically measure our Fat % and Hydration %.
LCD will prompt to show your Fat % (icon "BF") followed by hydration % (icon "BW").
Subsequently, LCD will prompt back and forth alternately between value of Fat % and
hydration % for 5 times, and then automatically shut down.
By the lower edge of the LCD, you will see a bar line of multiple vertical bars.This
key line indicates your Fat % level, telling where your fat level standing is
comparing to the statistics norms. Whether you are considered as thin, normal,
or obesity. Your can take this indication as a reference data of your condition.
