4
A
AA
AA
C
C
C
C
AA
E
E
ASSEMBLY INSTRUCTIONS
1. Place one Foot Pole (A) flat on the ground with
one short arm pointed up and the other level with the
floor. Attach the Base Pole (C) to the lower arm of the
Foot Pole using the Foot Pole’s Steel Spring Clip (AA),
pushing down on the silver-colored pin at that end of
the Foot Pole and then sliding the wider end of the
Base Pole over the pin until the pin pops into the oval
hole in the Base Pole, locking both poles in place.
Repeat step with other Foot Pole, attaching it to
the wider end of a Pole with Tapered End (B).
1
2. Attach the Pole with Tapered End (B) from Step
1 to the Base Pole (C). Make sure the Steel Spring
Clip (AA) snaps into place.
2
Hardware Used
Steel Spring Clip
(pre-assembled)
x 1
AA
AA
Hardware Used
Steel Spring Clip
(pre-assembled)
x 2
AA
B
