21
General Installation Recommendations
Installation
IND100210-14
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any Series
X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.
Illustration
Pins
Manufacturer Details
Connector used for module
5-pin
Phoenix 1827732
MC 1,5/ 5-STF-3,81
Screwdriver: SZS 0,4X2,5mm
VDE, slot-headed.
Tightening torque min. 0.22 Nm.
Tightening torque max 0.25 Nm.
• RS-422 / RS-485 / SCOM (Serial Remote Control) / Buzzer
• RS-422 / RS-485 NMEA (PCA100293-1)
• Digital Input/Output (HT 00268 OPT-A1)
Identifi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference:
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732
2-pin
Phoenix 1961986
MSTB 2,5/ 2-STF-5,08 BK
Screwdriver: SZS 0,6x3,5, slot-
headed.
Tightening torque min. 0.5 Nm.
Tightening torque max 0.6 Nm.
• DC Power IN (24VDC) - Single Input
Identifi ed on Hatteland Display product data sheet as:
“Terminal Block 5.08”
└ Reference:
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1961986
4-pin
Weidmüller 1792970000
BCZ 3.81/04/180F SN BK BX
Screwdriver: 0.4x2.5mm DIN 5264.
Tightening torque min.. 0.2 Nm.
Tightening torque max. 0.25 Nm.
• CAN Interface (HT 00254 OPT-A1)
Identifi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference:
http://catalog.weidmueller.com/catalog/Start.do?localeId=en&ObjectID=1792970000
Summary of Contents for HD 08T21 STD-***-F SERIES
