Hatsuyuki HD12X, User Manual, Page: 9 / 15

OVERLOAD PROTECTOR/RESET
This machine is equipped with an overload protector, which will
automatically protect the motor by stopping operation in the event
of overload.
When protector engages, machine will stop.
Should this occur, please take the following measures:
Switch the machine OFF and unplug machine.
Check the machine and rectify the problem;
eg. Take out the ice from the cartridge in case the
blade is stuck in the ice. Then, place the ice back
into the cartridge.
Leave the machine switched off and unplugged
for 20 minutes.
.
● The machine will recover automatically after
a 20 minute rest.
* If the protector engages often, contact your supplier.
Cartridge
Blade
Block Ice
Unplug the machine.
● Be sure to unplug machine after use.