background image

Form No. TPUM-0408

8

HATCO LIMITED WARRANTY

1. PRODUCT WARRANTY

Hatco warrants the products that it manufactures

(the “Products”) to be free from defects in materials

and workmanship, under normal use and service,

for a period of one (1) year from the date of

purchase when installed and maintained in

accordance with Hatco’s written instructions or 18

months from the date of shipment from Hatco. Buyer

must establish the product’s purchase date by

returning Hatco’s Warranty Registration Card or by

other means satisfactory to Hatco in its sole

discretion.

Hatco warrants the following Product components to

be free from defects in materials and workmanship

from the date of purchase (subject to the foregoing

conditions) for the period(s) of time and on the

conditions listed below:

a) One (1) Year Parts and Labor PLUS One

(1) Additional Year Parts-Only Warranty:

Toaster Elements (metal sheathed)

Drawer Warmer Elements (metal sheathed)

Drawer Warmer Drawer Rollers and Slides

Food Warmer Elements (metal sheathed)

Display Warmer Elements (metal sheathed air

heating)

Holding Cabinet Elements (metal sheathed air

heating)

Built-In Heated Well Elements

(metal sheathed)

b) One (1) Year Parts and Labor PLUS Four

(4) Years Parts-Only Warranty on

pro-rated terms that Hatco will explain

at Buyer’s request:

3CS and FR Tanks

c) One (1) Year Parts and Labor PLUS Nine

(9) Years Parts-Only Warranty on:

Electric Booster Heater Tanks

Gas Booster Heater Tanks

THE

FOREGOING

WARRANTIES

ARE

EXCLUSIVE AND IN LIEU OF ANY OTHER

WARRANTY, EXPRESSED OR IMPLIED,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED

WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE OR

PATENT OR OTHER INTELLECTUAL PROPERTY

RIGHT INFRINGEMENT. Without limiting the

generality of the foregoing, SUCH WARRANTIES

DO NOT COVER: Coated incandescent light bulbs,

fluorescent lights, lamp warmer heat bulbs, glass

components, Product failure in booster tank, fin tube

heat exchanger, or other water heating equipment,

caused by liming, sediment buildup, chemical attack

or freezing, Product misuse, tampering or

misapplication, improper installation or application of

improper voltage.

2. LIMITATION OF REMEDIES AND DAMAGES

Hatco’s liability and Buyer’s exclusive remedy

hereunder will be limited solely, at Hatco’s option, to

repair or replacement by a Hatco-authorized service

agency (other than where Buyer is located outside

of the United States, Canada, United Kingdom or

Australia in which case Hatco’s liability and Buyer’s

exclusive remedy hereunder will be limited solely to

replacement of part under warranty) with respect to

any claim made within the applicable warranty

period referred to above. Hatco reserves the right to

accept or reject any such claim in whole or in part.

Hatco will not accept the return of any Product

without prior written approval from Hatco, and all

such approved returns shall be made at Buyer’s

sole expense. HATCO WILL NOT BE LIABLE,

UNDER

ANY

CIRCUMSTANCES,

FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES,

INCLUDING BUT NOT LIMITED TO LABOR

COSTS OR LOST PROFITS RESULTING FROM

THE USE OF OR INABILITY TO USE THE

PRODUCTS OR FROM THE PRODUCTS BEING

INCORPORATED IN OR BECOMING A

COMPONENT OF ANY OTHER PRODUCT OR

GOODS.

All manuals and user guides at all-guides.com

Summary of Contents for TPU-230-4 Series













Reviews: