Form No. HGSMCEM-0115
5
SPECIFICATIONS
Dimensions
400 mm
(15-3/4″)
56 mm
(2-1/4″)
344 mm
(13-9/16″)
533mm
(21″)
600 mm
(23-5/8″)
Front View
Side View
NOTE: The specification label is located on the bottom of the
unit. See label for serial number and verification of unit
electrical information.
INSTALLATION
General
Use the following procedure to install a Heated Glass Shelf.
ELECTRIC SHOCk HAzARD: Unit is not weatherproof.
Locate unit indoors where ambient air temperature is a
minimum of 21°C (70°F).
FIRE HAzARD: Locate unit a minimum of 25 mm (1″) from
combustible walls and materials. If safe distances are not
maintained, combustion or discoloration could occur.
Locate unit at proper counter height in an area that is
convenient for use. Location should be level to prevent
unit or its contents from falling accidentally and strong
enough to support the weight of the unit and contents.
Do not lay unit on the side with the control panel or
damage to the unit could occur.
NOTICE
CAUTION
WARNING
1. Remove the unit from the box.
2. Remove tape and protective packaging from all surfaces
of the unit.
NOTE: To prevent delay in obtaining warranty coverage,
complete online warranty registration. See the
IMPORTaNT OWNER INFORMaTION
section for
details.
3. Place the unit in the desired location.
• Locate the unit in an area where the ambient air
temperature is constant and a minimum of 21°C (70°F).
avoid areas that may be subject to active air movements
or currents (i.e., near exhaust fans/hoods and air
conditioning ducts).
• Make sure the unit is at the proper counter height in an
area convenient for use.
• Make sure the countertop is level and strong enough to
support the weight of the unit and food product.
• Make sure all the feet on the bottom of the unit are
positioned securely on the countertop.
NOTE: Multiple Heated Glass Shelves can be placed side-by-
side.
Dimensions — HGSM-4060
Summary of Contents for HGSM-4060
Page 50: ...Form No HGSMCEM 0115 50 NOTES ...
Page 51: ...Form No HGSMCEM 0115 51 NOTES ...
