English
Form No. GR2AM-0920
18
OPERATION
General
Hatco Glo-Ray
Designer
Infrared Foodwarmers are designed
for ease of operation. Use the following information and
procedures to operate the unit.
WARNING
Read all safety messages in the IMPORTANT SAFETY
INFORMATION section before operating this equipment.
CAUTION
BURN HAZARD: Some exterior surfaces on unit will get
hot. Use caution when touching these areas.
Remote Control Enclosure (RMB)
All models are available with a remote control enclosure
(RMB). Each heating element is controlled by an I/O (ON/OFF)
Toggle Switch or an optional adjustable infinite control. Models
equipped with lights have an additional Lights I/O (ON/OFF)
toggle switch for controlling the lights. The following is a list of
the available controls.
I/O (ON/OFF) Toggle Switch
—Turns power on and off to
the heating elements and/or the lights (depending on control
configuration).
Infinite Control
—Turns on the power and controls the output
of the heating elements.
Lights I/O (ON/OFF) Toggle Switch
—Turns power on and off
to the lights.
Indicator Light
—Illuminates when power is on, shuts off when
power is off.
NOTE: Toggle switches cannot be used on circuits that exceed
15 amps. Infinite controls cannot be used on circuits
that exceed 12.2 amps.
Startup
1. Turn on the heating element(s). The indicator light (if
equipped) will illuminate and the heating elements will
energize.
• If unit is equipped with a I/O (ON/OFF) toggle switch,
move the toggle switch to the
I
(ON) position.
• If unit is equipped with an optional infinite control(s),
turn the control to the desired setting.
NOTE: Allow 15
–
20 minutes to reach operating temperature.
2. On models equipped with display lights, move the light I/O
(ON/OFF) toggle switch to the
I
(ON) position.
ON/OFF (I/O)
Toggle Switch
Infinite
Control
Indicator Light
Infinite
Control
ON/OFF (I/O)
Toggle Switch
Indicator
Light
RMB Series
RMB2 Series
Remote Control Enclosures
Shutdown
1. Move the I/O (ON/OFF) toggle switch to the
O
(OFF)
position or turn the optional infinite control(s) to the
O
(OFF) position.
• The indicator light (if equipped) will shut off and the
heating elements will shut down.
2. On models equipped with display lights, move the light I/O
(ON/OFF) toggle switch to the
O
(OFF) position.
