6
5
4
3
2
1
$2)6%
3AVE
9
8
7
A B C D
&
-%.5
$2)6%
%NTER
&
2
2
2
$2)6%
3AVE
$2)6%
%NTER
ON.OFF
(PROFILES/ESC)
Bracketing setting
The Bracketing function is set in the following manner:
1
) Press the
MENU
button.
2
) Turn the front control wheel until
Bracketing
appears
3
) Press
Enter
(
DRIVE
) button on the grip
4
) Turn the front control wheel to access the options, that are:
Number of Exposures
(the number of exposures required
in the sequence)
Sequence
(the sequential order of the over- or
under- exposures)
Step
(the amount of EV variation from the standard
exposure setting)
(A drop shadow will be displayed beneath the selected symbol, for
example )
5
) In
turn the rear wheel to choose the number of frames
required:
2, 3, 5, 7 or 9.
6
) In
turn the rear wheel to choose one of four sequences:
A
: Standard, Over, Under
B
: Standard, Under, Over
C
: Over, Standard, Under
D
: Under, Standard, Over
7
) In
turn the rear wheel to choose the amount of EV variation
required:
1, 1/2, 1/3 EV.
8
) Press
SAVE
(
DRIVE
button) to save the setting.
9) Press
ENTER
(
DRIVE
button) again from the Bracketing screen
to activate the function. Press
On
(
AF
button). Note that this now
reads
Off
and the line of text at the bottom of the screen reads
‘
Bracketing on’
.
Half-press the shutter release button to standby mode for this
function (press the shutter release button again (full press) for
activation) or full-press the shutter release for immediate activa-
tion.
To escape from this mode press
MENU
, then
Enter
(DRIVE but-
ton on the Bracketing screen, then
Off
(AF button).
Check the lower text-row on the screen for ON or OFF status
The default setting is a shutter speed change in a bracketing
sequence. However, if the camera is set in Manual mode, you
can choose an aperture change instead (Custom Options
- Bracket param. in Manual - 25).
See note at the beginning of this section regarding the differ-
ence between Single and Continuous drive settings. In both
cases, the bracketing function is automatically reset for a new
sequence.
A bracketing sequence can be stopped mid-sequence by press-
ing the ESC (ON.OFF) button.
As an example, a 5 frame sequence with an EV 1 variation set-
ting at ‘Standard, Over, Under’ would produce: Standard (O EV
variation), +1EV, -1EV, +2EV, -2EV.
Number of exposures highlighted.
3 frames chosen as option.
Sequence highlighted. ‘Standard,
over, under’ chosen as option.
Step highlighted.
1/3 EV variation chosen as option.
Screen after Bracketing setting acti-
vated indicating 3 frames remaining
in a Standard, Over, Under, sequence
with no adjustment to the next frame.
Viewfinder display indicating no
adjustment to next frame and three
frames left in the sequence.
EXAMPLE
EXAMPLE
93