Hasselblad CFV II 50C User Manual Download Page 23

Page: 23 / 112

CFV II 50C USER GUIDE

www.hasselblad.com

SAFETY

CONTENTS

Caution!

When cleaning the camera, remove the batteries. This will

prevent damage to the camera.

Caution!

If you leave the camera unused for a long period, remove the

batteries. This will prevent damage to the equipment.

Caution!

Do not try to remove the glass IR filter from the front of the

CMOS (due to dust or similar). This can cause damage to the

equipment. Always contact your local Hasselblad Authorized

Service Centre.

Caution!

If you use canned compressed air to clean the glass of IR filter,

read the instructions very carefully before use. This will help

prevent damage to the filter.

3.3 DISPOSAL

This product must be put in municipal waste.

Check local regulations for disposal.

Summary of Contents for CFV II 50C

















































































































Search results

Summary of Contents for CFV II 50C

Reviews:

Related manuals for CFV II 50C

Brands by name

Popular brands

Hasselblad CFV II 50C, User Manual

Search results

Summary of Contents for CFV II 50C

Reviews:

Related manuals for CFV II 50C

Brands by name

Popular brands