September
19, 2018
HASSEB AUDIO OVER ETHERNET XLR INSTRUCTIONS MANUAL
VERSION 1.0
hasseb Inc.
www.hasseb.fi
NETWORK SETTINGS
The hostname, IP address, subnet mask, and default gateway can be set using the
web interface. The DHCP can also be enabled or disabled. By default the device
uses DHCP to assign the network settings. The default hostname for the device is
hasseb-AoE-XX-XX
, where
XX-XX
are the last two octets of the device MAC address
.
After configuration of new network settings, the device will reboot automatically.
STREAM SETTINGS
The network audio stream sent by
hasseb Audio Over Ethernet
device is named as
AES67-stream (on ‘network_hostname’)
, where
‘network_hostname’
is the
hostname of the device as defined in network settings (for example
AES67-stream
(on hasseb-AoE-AB-CD)
).
AES67 standard defines the audio stream following RTSP (Real Time Streaming
Protocol) used also for example in internet radio stations. The address of the
output stream is visible on the “RTSP stream address” field. In addition to another
AES67 compatible
device, the output stream can be listened using any media
player supporting RTSP protocol, such as VLC media player.
By default, the IP address of the sent network audio stream is of a form
239.xxx.xxx.xxx, where xxx is chosen randomly. If you want to manually choose the
IP address of the network stream you can choose the “Add IP address manually
for the output stream” option and add the wanted IP address manually to the “IP
address” field.
The SDP file of the network audio stream is visible in the “SDP file” field if you need
to add it manually to another AES67 device.
