October
20, 2018
HASSEB AUDIO OVER ETHERNET PRO INSTRUCTIONS MANUAL
VERSION 1.0
hasseb Inc.
www.hasseb.fi
Figure 1: A web browser is used to configure the device.
AUDIO SETTINGS
The audio settings are used to configure the input port as the analog 3.5 mm
audio jack or the optical Toslink port.
The default volume after restarting the device is set using the input and output
gain sliders. The signal buffer/latency in milli seconds can be set individually for
both the input and output streams.
The sample rate and resolution for the audio signal is fixed to 48 kHz / 24-bit.
VOLUME
The volume settings can be used to change the volume level for each audio
channel separately. The volume settings are not saved to volatile memory, thus
the default volumes set using the audio settings are used after reboot.
NETWORK SETTINGS
