safety requirements
• Use a wall outlet located near the equipment. Do not route the power cord between pieces of furniture or over sharp edges.
• Make sure there is no strain on the power supply cord.
• Avoid using outlets controlled by wall switches or share by other equipment.
• To reduce the risk of fire, use only the power cord supplied with the IM280 iMeter™.
• Do not use this product on a wet floor or near water.
• In the case of liquid spillage, disconnect the external power supply from the wall outlet prior to cleaning.
general safety
• Before using your IM280 iMeter™, thoroughly read the operating instructions.
• To reduce the risk of fire, electric shock and injury to persons, follow normal and basic safety precautions for office equipment when using your IM280 iMeter™.
• To avoid equipment damage, only use approved supplies (ink, tapes, cleaners...).
follow the additional safety precautions below:
• Do not place lighted candles, cigarettes, cigars, etc. on the IM280 iMeter™.
• When lifting covers, wait for all parts to stop moving before placing hands near the ink cartridge assembly.
• When changing internal (ink, postage meter...), avoid using too much force to prevent personal injury or damaging equipment.
• To prevent overheating, do not block the equipment ventilation openings.
• Do not remove bolted covers as they enclose potentially hazardous parts that should only be accessed by a Service Representative.
additional safety precautions
• Power is supplied to the unit when it is connected to an electrical outlet, even if the unit is turned off or in sleep mode.
• Disconnect the wall plug to remove power from the unit.
• DO NOT make any changes or modifications to this equipment.
• Use only the Neopost/Hasler supplied USB, Internet/LAN, or modem cables.
• This equipment is NOT user-serviceable. If you have any problems with the equipment contact customer service.
• If you have alarm equipment connected to the telephone line, check first with the telephone company or a qualified installer to confirm that connection of this
equipment to your telephone line does not disable the alarm equipment.
your im280 imeter™ should only be operated in the following conditions:
• Temperature range: 50°F - 104°F (10°C - 40°C).
• Relative humidity: 80% maximum without condensation.
The IM280 iMeter™ contains moving parts. Keep fingers, long hair, neck ties, and loose clothing away from the mail path at all times.
