Hasler HJ700, Operating Manual

Page: 31 / 95

2222
1
Be aware of the notes in chapter 2.2, page 12: “Handling Ink Cartridges”
as well as the notes of the ink cartridge manufacturer.
5.3.1 Correctly Inserting the Ink Cartridge
1. Printer switch on, go to the offline mode with the “Start“ key.
2. Lift the safety cover. The carriage moves to the middle. On the display ap-
pears:
SAFETY COVER OPEN!
3.
Completely lift (upwards) the locking lever (see arrow).
4. Take the ink cartridge out of the packaging and remove the protective strip.
Do not touch the contact plate…
In order to ensure a secure contact for the ink cartridge to the electronics of
the printer, the locking lever has two functions:
•
Tipping the ink cartridge into the end position
•
Secure locking during operation
5. Set the ink cartridge, with the jet surface downward, with a straight motion
into the holder –
do not press in the direction of the locking lever .
6. The ink cartridge stands at a slight slant, prior to the closing of the locking
lever. The locking lever then tips the ink cartridge into the end position.
7. Close the locking lever.
Do not tip the ink cartridge into the end position by hand! This
is taken care of by the locking lever. Otherwise, you can dam-
age the ink cartridge or the contact plate!
8. When the ink cartridge has been correctly inserted, close the safety cover. On
the display appears:
Emergency Button
Pleas wait……
9. After selection, the carriage moves to the service station.
31