Hasler HJ500, Operating Manual

Page: 29 / 40

21
Cleaning
The HaslerJet 500
WARNING
THE HASLERJET 500 PRINTER IS A PRECISION MACHINE THAT SHOULD BE
CLEANED REGULARLY TO INSURE MANY YEARS OF S ERVICE. BEFORE
PERFORMING ANY MAINTENANCE DISCONNECT THE MACHINE FROM ITS POWER
SOURCE!
The HaslerJet 500 must be cleaned regularly of accumulated paper dust and ink. Depending on the types of
media that are run, paper dust may accumulate within the printer and on the transport. To properly clean the
HaslerJet 500, unplug it from the power receptacle and remove the covers.
The internal areas are best cleaned with a vacuum that has a soft brush attachment to help loosen the dust
particles. Take care not to damage the PC Boards or electrical wiring.
The exterior of the machine may be cleaned with any standard household cleaner which is non-abrasive and does
not contain plastic harming solvents.
CAUTION
NEVER SPRAY OR POUR CLEANERS DIRECTLY ON OR INTO TH E HASLERJET
500 PRINTER. EXCESS LIQUID COULD HARM ELECTRONIC PARTS. ALWAYS
DAMPEN A RAG WITH THE CLEANER AND APPLY IT TO THE PARTS TO BE
CLEANED.
Cleaning the Media Sensor
Periodically check the media sensor located in the print carriage area of the printer section. The sensor should be
clean and free of accumulated paper dust. Use a vacuum with a soft brush attachment or dry compressed air to
remove the dust.