14
MAINTENANCE
COUNTER BALANCER
Takes the saw-blade automatically back behind
the stop in the 0-position (Fig. 7).
TIGHTEN THE SPRING
1
Put the carriage in the 0-position.
2
Put the delivered plastic key in the hole at
the front side of the counter balancers.
3
Turn the key clockwise (+).
LOOSEN THE SPRING
1
Put the carriage in the 0-position.
2
Push the control spring between the
counter balancer and the support
downwards.
3
The counter balancer can be adjusted at
the proper tension.
Figure 7
