Manual watering
If youʼre in your greenhouse and decide that you want to water, you can either use your phone, or
the button on the top of the control box.
With your phone / tablet via the web app (online mode)
Ensure your phone is connected to the same WiFi network you programmed the box with. If you
have weak WiFi, you might need to turn off 4G to force your phone onto WiFi.
1. Wake the control unit up by pressing the button on
top once. Wait until you hear the rising tone.
2. Using the Harvst web app on your phone or tablet,
visit the dashboard for the control box.
3. Click the tab for the zone you want to water, and
choose one of the three green buttons to water for 10,
20 or 30 seconds. If the buttons are not green, the app
isnʼt connected to the control unit.
With your phone / tablet and the system control panel (offline mode)
1. Wake the control unit up by pressing the button
on top once. Wait until you hear the rising tone.
2. Log onto the control unit WiFi network
(harvst-xxxx).
3. Wait until you are directed to the dashboard, and
then choose a blue button on the appropriate zone.
With the manual watering button
1. Wake the control unit up by pressing the button on top once. Wait until you hear the rising
tone.
2. Hold the watering button down until you get a single beep.
If you let go now, it will water zone 1 for 30 seconds. If you hold the button down for longer, until
you get two long beeps and then let go, it will water zone 2 for 30 seconds. If you continue to hold
for 3 beeps, manual override has been cancelled and you can let go.
1 beep = water zone 1
2 beeps = water zone 2
3 beeps = cancel
13